Victaulic Coupling Clamp style Flexible Coupling style 75 submittal

Kami stok dan jual Victaulic Coupling Clamp style Flexible Coupling style 75 submittal Jakarta Indonesia.

Flexible Coupling STYLE 75 Style 75 is available where moderate pressures are expected or weight considerations are a factor. Up to 50% lighter in weight than the Style 77, the Style 75 coupling is recommended for service up to 500psi/ 3450kPa depending on size. Housings are cast in two identical pieces in all sizes. Hot-dip galvanized and special coatings are available for all sizes. The Victaulic standard flexible coupling offering for grade “ EHP” or “ T” gaskets is the Style 177 installation-ready flexible coupling. For all available sizes, the Style 177 is the standard flexible coupling Victaulic supplies in North America for piping systems using Grade “ EHP” or “ T” gaskets. Contact Victaulic for further details. Performance data presented in this document is based on use with standard wall, carbon steel pipe. For use with stainless steel pipe, please reference document 17.09 for pressure ratings and end loads. When used on light wall stainless steel pipe, the Victaulic RX roll set must be used to roll groove the pipe. For further information regarding roll grooving stainless steel, refer to document 17.01. MATERIAL SPECIFICATIONS Housing: Ductile iron conforming to ASTM A-536, grade 65-45-12. Ductile iron conforming to ASTM A-395, grade 65-45-15, is available upon special request. Housing Coating: Orange enamel. • Optional: Hot dipped galvanized and others. Gasket: ( specify choice* ) • Grade “ E” EPDM EPDM ( Green color code) . Temperature range – 30° F to + 230° F/ – 34° C to + 110° C. Recommended for hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/ NSF 61 for cold + 86° F/ + 30° C and hot + 180° F/ + 82° C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. • Grade “ T” nitrile Nitrile ( Orange color code) . Temperature range – 20° F to + 180° F/ – 29° C to + 82° C. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; except hot, dry air over + 140° F/ + 60° C and water over + 150° F/ + 66° C. NOT RECOMMENDED FOR HOT WATER SERVICES. * Services listed are General Service Recommendations only. It should be noted that there are services for which these gaskets are not recommended. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service recommendations and for a listing of services which are not recommended. NOTE: Additional gasket styles are available