Guiberson Tubing Swab Mandrels

Kami stok dan Jual Guiberson Tubing Swab Mandrels Jakarta Indonesia

GUIBERSON® swabs have set industry performance standards for well over half a century. Today, GUIBERSON’ s wide selection of swabs and cups assures the right combination for every swabbing application, from light load, shallow well service to the heaviest loads and deepest wells. Cameron offers three types of tubing swab mandrels: knuckle joint, standard, and UF. The knuckle joint tubing swab provides a large external bypass for fast falling and uses the cup itself as a valve. It was designed to allow cups to be changed in just seconds. To disassemble, just lift the mandrel 90 to separate the two sections of the joint. The old cup can then be removed rapidly and the new one dropped in place. There are no threads on the swab knuckles, no danger of damage and galling, and no tools needed to change cups. The standard tubing swab is a fast falling, threaded, internal bypass swab that uses two cups on its one-piece mandrel. It is designed for long, tough service. The UF tubing swab is a threaded joint, external bypass swab, similar to the knuckle joint swab except that it is threaded. Specifications The knuckle joint tubing swab is made of tough, cast, heat-treated steel. The design allows as many mandrels and cups as desired to be run on the swab. Upper mandrels are keyed to hold the joint sockets in line, and square shoulders reinforce the joint, preventing spreading under load. The rigidity of the joint absolutely prevents jackknifing and disassembly in the well. The lower mandrel allows a full 360p swivel action. The fluted shafts do not go all the way down so the cups can seal when being pulled. The standard tubing swab has a large bypass area and full-opening check valve to assure rapid running and smooth, trouble-free swabbing. It has a corrosion-resistant ball and steel seat seal. A no-go, machined as part of the bottom retaining nut, prevents sticking in seating nipples and tight spots. The no-go may be machined off when additional clearance is desired. The UF tubing swab is made of forged, heat-treated steel. It is available for 1.315” , 1.660” , and 1.900-2.063” tubing.