WKM 210 FLOATING BALL VALVES DynaSeal

Kami stok dan jual WKM 210 210 FLOATING BALL VALVES Jakarta Indonesia.

DynaSeal The W-K-M floating ball valve design expands further into the oilfield market with the DynaSeal 210 ball valve. This rugged but economical ductile iron ball valve is the valve of choice for threaded end oilfield applications where carbon steel body material is not a requirement. The W-K-M 210 ball valve is a two piece design with ductile iron body and tailpiece. Even though this valve is economical, it includes many of the premium design features found in the W-K-M carbon steel 310 ball valves. It is available in 1 in. ( 25 mm) to 4 in. x 3 in. ( 100 mm x 80 mm) sizes. Working pressures offered are 750, 1, 000, 1, 500 and 2, 000 psi. ( See size/ pressure table on page 4) . This valve is primarily used in the Oilfield market, typically chosen for the following applications. • Production wing valves on low pressure gas wells • Production flow lines • Production gathering systems for water, oil and gas • Gas blow down service • Tank batteries for storage or production • Frac water tanks FEATURES AND BENEFITS LOCKING CAPABILITY IS STANDARD • The valve can be locked in the open or closed position. POSITIVELY RETAINED STEM • The stem is positively retained. It is designed to prevent stem blowout while the valve is in service. COLOR CODED WORKING PRESSURES The lock plates are color coded so pressure ratings are quickly identified • 750/ 1, 000 psi green. • 1, 500 psi blue. • 2, 000 psi red. STANDARDS AND SPECIFICATIONS DynaSeal 210 ball valves conform to the following design and testing standards: STANDARD MATERIALS • API line pipe threads • Body: Ductile Iron • Ball and Stem: Carbon Steel or Stainless Steel • Seat and Seals: Acetal Plastic/ Buna-N OPTIONAL MATERIALS • Ball and Stem: Stainless Steel • Seat and Seals: TFE/ FKM COMPLIANCES • ASME/ ANSI B16.5 • MSS-SP-6, 25, 55, 72 and 61 • NACE MR0175 ( Rev. 2002) • API 607 ( Fire Test Specification) 750, 1000, 1500 and 2000 psig WORKING PRESSURE 1 in. ( 25 mm) FULL PORT THROUGH 4 in. x 3 in. ( 100 mm x 80 mm) REDUCED PORT STANDARD MATERIALS Qty. DESCRIPTION MATERIAL 1 Body ASTM A395 Ductile Iron 1 Tailpiece ASTM A395 Ductile Iron 1 Ball Carbon Steel Chrome Plated 316 SS 1 Stem AISI 1213/ 1215, Steel, Zinc Plated 316 SS ( 17-4PH SS on 2 in. x 1 1/ 2 in. ( 50 mm x 40 mm) 2 Seat Ring Acetal Plastic ( 43) Filled TFE ( 42) Carbon Filled TFE ( 2) 750/ 1000 psi 1 Tailpiece Gasket PTFE 2 Stem O-Ring Buna-N FKM 1 Stem Gasket ( Thrust Bearing) Filled TFE 1 Locking Plate Steel 1018/ 26 1 Locking Plate Retaining Ring Spring Steel 1 Wave Spring Spring Steel 1 Stop Pin Spring Steel 1 Handle 1 in. ( 25 mm ) FP & 2 in. x 1 1/ 2 in. ( 50 x 40) : Carbon Steel, Zinc Plated 2 in. ( 50 mm) FP through 4 in. x 3 in. ( 100 x 80) : ASTM A395 Ductile Iron 1 Handle Retainer Nut on 1 in. ( 25 mm) Retainer Ring on 2 in. x 1 1/ 2 in. ( 50 mm x 40 mm) Bolt on 2 in. ( 50 mm) FP through 4 in. x 3 in. ( 100mm x 80 mm) 1 Seal Pin/ Dart Brass or Aluminum