Victaulic Coupling Clamp Zero-Flex Rigid Coupling STYLE 07

Kami stok dan jual Victaulic Coupling Clamp Zero-Flex® Rigid Coupling STYLE 07 Jakarta Indonesia.

The unique angle-pad design of the Zero-Flex® Style 07 coupling adjusts to standard pipe and roll or cut groove tolerances, positively clamping the pipe to resist flexural and torsional loads. The wider key section fills more of the groove area. The Victaulic standard rigid coupling offering for grade “ EHP” or “ T” gaskets is the Style 107 installation-ready rigid coupling. For all available sizes, the Style 107 is the standard rigid coupling Victaulic supplies in North America for piping systems using Grade “ EHP” or “ T” gaskets. Contact Victaulic for further details. Style 07 couplings are rated up to 750psi/ 5175kPa, dependant on size, for 1 – 12" / 25 – 300mm piping systems. Rigid couplings provide rigidity for valve connections, machinery rooms, fire mains, and long straight runs. Support and hanging requirements correspond to ASME B31.1 Power Piping Code, ASME B31.9 Building Services Code and NFPA 13 Sprinkler Systems. Angle-pad design permits assembly by removing one nut/ bolt and scissoring housing over gasket. This reduces the number of components to handle during assembly, speeds and eases installation. Performance data presented in this document is based on use with standard wall, carbon steel pipe. For use with stainless steel pipe, please reference document 17.09 for pressure ratings and end loads. When used on light wall stainless steel pipe, the Victaulic RX roll set must be used to roll groove the pipe. For further information regarding roll grooving stainless steel, refer to document 17.01. For 14 – 24" / 350 – 600mm sizes Victaulic offers the Advanced Groove System ( AGS) line of products. Request publication 20.02 for information on the rigid W07 AGS coupling MATERIAL SPECIFICATIONS Housing: Ductile iron conforming to ASTM A-536, grade 65-45-12. Ductile iron conforming to ASTM A-395, grade 65-45-15, is available upon special request. Housing Coating: Orange enamel. • Optional: Hot dipped galvanized and others. Coupling Gasket: ( specify choice‡ ) • Grade “ E” EPDM EPDM ( Green color code) . Temperature range – 30° F to + 230° F/ – 34° C to + 110° C. Recommended for cold and hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/ NSF 61 for cold + 86° F/ + 30° C and hot + 180° F/ + 82° C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. • Grade “ T” nitrile Nitrile ( Orange color code) . Temperature range – 20° F to + 180° F/ – 29° C to + 82° C. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not recommended for hot water services over + 150° F/ + 66° C or for hot dry air over + 140° F/ + 60° C. ‡ Services listed are General Service Recommendations only. It should be noted that there are services for which these gaskets are not recommended. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service recommendations and for a listing of services which are not recommended. NOTE: Additional gasket styles are available. Contact Victaulic for details. Bolts/ Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ASTM A-449 and physical requirements of ASTM A-183.